Making EMMs work with CCCam 2.1.4 , Unbutu and DVBViewer

[Bob12]

Hi,

I have installed CCCam on an Unbutu 8.0.4 virtual machine with the following config file to record Sky UK:

F: avc avc
                                                                                                                              
SERVER LISTEN PORT : 12001
                                                                                                                              
SERIAL READER : /dev/ttyUSB0 smartreader+
                                                                                                                              
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3580000
                                                                                                                                                                                                                                                            
EMM THREADS : 3
                                                                                                                              

BOXKEY: /dev/ttyUSB0 xx xx xx xx     # Actual number is my box key of course
                                                                                                                              
PIN: /dev/ttyUSB0  xxxx  # real pin number here

I use DVBViewer and Acamd with the following configuration:

cccamn:192.9.200.79:12001:1/0000/0000:avc:avc

It works mostly well, but I have recurring 8 seconds gaps in the recordings from time to time, as indicated here by MPEG2REPAIR for example:

File Size Processed: 13.58 GB, Play Time: 03h:08m:42s
51.09 FPS (Average), 9.64 Mbps (Average).
AC3 Audio: 3/2 Channels (L, C, R, SL, SR) + LFE, 48.0 kHz, 384 kbps.
Dialog Normalization: -27.0 dB, Center Mix Level: -3.0 dB, Surround Mix Level: -3.0 dB
231 of 353803 audio frames found with errors.
246.645669 seconds of audio timestamp gaps.

I tried with two cards and 2 PCs, and the gaps happen exactly at the same moment on both.

My guess is that Sky sends mini EMM updates from time to time, and the decoding stops.

The Web CCcam interface shows that no EMMs are processed.

What can I do to process these EMMs?

I also tried Hadu instead of Acamd, but the problem is exactly the same.

Any help would be greatly appreciated.

[janielsen]

if u have client on u can have them to send emm
just do like this in FLINE
F: user pass ? 0 1 { 0:0:? }
then u will recive the emm they are sending