Possible bug in cccam 2.1.13

brasko · 11-29-2009, 08:14 AM

my clients got disconected every 10min, and number conected are less then 10, also clients who also uses 2.1.3 says the same. When i return 2.0.11 everithing is fine.

cardsharing · 11-29-2009, 08:17 AM

do you use linux or dreambox version?
i ask because i use 2.1.3-linux version 64 bits and all is oke

Quote:

Originally Posted by brasko

my clients got disconected every 10min, and number conected are less then 10, also clients who also uses 2.1.3 says the same. When i return 2.0.11 everithing is fine.

kokokoko · 11-29-2009, 09:27 AM

Cube cafe 200s - sifteam 1.9.3E- Cccam 2.1.3 ( downloaded from sifteam server)

no problem everything is normal (sever or client )

brasko · 11-29-2009, 10:25 AM

I use dreambox version

pilotbabo · 12-03-2009, 09:49 AM

Run CCcam in debug mode and try to see which/what causes your problem.

anoble66 · 12-03-2009, 12:26 PM

I also had this problem. Check your flines, if your securing them using { } { } serverxx.dyndns.com - remove these lines and it should work again.

For some reason this isnt working in cccam 2.1.3 and causes clients to connect / re-connect.

Kurgan · 12-03-2009, 04:06 PM

I use { } { } dns.org
I have this on both DM7020 and DM800 and have no issues at all.
I have approx 30 peers on each box and almost all are using 2.1.3

You have to start Cccam via telnet and see what is going on, if you do not do this you are not fixing the problem but just ignoring it.

anoble66 · 12-03-2009, 05:42 PM

hmm interesting. All I can tell you is what worked for me. Before upgrading my config / cccam was working perfectly - 23 clients connected and stable. After upgrading I would get 3-4 clients connecting. When I looked at their F lines none of them had been secured with { } { } xxx.org. When I removed that config from the remaining lines all 23 connected immediately and stayed connected instead of connecting / disconnecting.

So either all my clients changed DNS or its a intermittant bug. I am using DM800HD on Nabilo 0.12

11-29-2009, 08:14 AM	#1
brasko Junior Member Join Date: Nov 2009 Posts: 6	Possible bug in cccam 2.1.13 my clients got disconected every 10min, and number conected are less then 10, also clients who also uses 2.1.3 says the same. When i return 2.0.11 everithing is fine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-29-2009, 09:27 AM	#3
kokokoko Junior Member Join Date: Apr 2009 Posts: 9	Cube cafe 200s - sifteam 1.9.3E- Cccam 2.1.3 ( downloaded from sifteam server) no problem everything is normal (sever or client )

11-29-2009, 10:25 AM	#4
brasko Junior Member Join Date: Nov 2009 Posts: 6	I use dreambox version

12-03-2009, 09:49 AM	#5
pilotbabo Junior Member Join Date: Jun 2009 Posts: 4	Run CCcam in debug mode and try to see which/what causes your problem.

12-03-2009, 12:26 PM	#6
anoble66 Junior Member Join Date: Dec 2009 Posts: 2	I also had this problem. Check your flines, if your securing them using { } { } serverxx.dyndns.com - remove these lines and it should work again. For some reason this isnt working in cccam 2.1.3 and causes clients to connect / re-connect.

12-03-2009, 04:06 PM	#7
Kurgan Junior Member Join Date: Aug 2009 Posts: 14	I use { } { } dns.org I have this on both DM7020 and DM800 and have no issues at all. I have approx 30 peers on each box and almost all are using 2.1.3 You have to start Cccam via telnet and see what is going on, if you do not do this you are not fixing the problem but just ignoring it.

12-03-2009, 05:42 PM	#8
anoble66 Junior Member Join Date: Dec 2009 Posts: 2	hmm interesting. All I can tell you is what worked for me. Before upgrading my config / cccam was working perfectly - 23 clients connected and stable. After upgrading I would get 3-4 clients connecting. When I looked at their F lines none of them had been secured with { } { } xxx.org. When I removed that config from the remaining lines all 23 connected immediately and stayed connected instead of connecting / disconnecting. So either all my clients changed DNS or its a intermittant bug. I am using DM800HD on Nabilo 0.12

User Name		Remember Me?
Password