How to setup CCcam with Digitv nagra3 cards Page 4

cardsharing · 10-06-2009, 07:30 PM

on dm500 is working, on dm800 is not working
tested by a friend

Quote:

Originally Posted by cristo4

i understand that, but my question was if newcs+mpcs+cccam+MGCAMD are working in the same time on dm800 with N3 card?

cristo4 · 10-10-2009, 09:06 PM

ok..i put my new n3 card in my dm800 with cccam+newcs+mpcs and it works....but i get very high ecm times...from 0,700 in the few first seconds to 2 or 3 seconds after some time. And that's why the channels deode from my peerse instead of my card. Any help in getting ecm time low please?

cardsharing · 10-11-2009, 09:35 AM

1.use the latest version of newcs (1.67)
2.set 700mhz in newcs-freqv.
I have tested with dm500s -nagra2 cards-250ms, nagra3 350ms

Quote:

Originally Posted by cristo4

ok..i put my new n3 card in my dm800 with cccam+newcs+mpcs and it works....but i get very high ecm times...from 0,700 in the few first seconds to 2 or 3 seconds after some time. And that's why the channels deode from my peerse instead of my card. Any help in getting ecm time low please?

aritter · 10-11-2009, 12:16 PM

hello thanks cardsharing , i need help i will buy digi n3 and can i n3 cfg new card for dreambox cfg that dreambox read card please help

szili_boy · 10-16-2009, 03:41 PM

Hello to all, i have some news, i've heard some rumors that it is possible to read N3 card without mpcs, with a newcs+cccam connection via radegast (R line with 256 at the end in cccam.cfg) I've tried to configure but it is something wrong with my config R line is always offline.

And there is an alternative to newcs it is called rqcs.

@cardsharing: setting frequency to 700Mhz is safe? Card will resist?

cardsharing · 10-16-2009, 04:16 PM

600 mhz is only for dm800, for dm500 is 357
I tried with R line (newcs+cccam ) but doesnt work
so, the only solution is newcs+mpcs+cccam or newcs+mgcamd

Quote:

Originally Posted by szili_boy

Hello to all, i have some news, i've heard some rumors that it is possible to read N3 card without mpcs, with a newcs+cccam connection via radegast (R line with 256 at the end in cccam.cfg) I've tried to configure but it is something wrong with my config R line is always offline.

And there is an alternative to newcs it is called rqcs.

@cardsharing: setting frequency to 700Mhz is safe? Card will resist?

csubri · 10-21-2009, 01:24 PM

Hi!
I have Digi N3 card, and computer for server. What kind of cardreder should I buy, and which software to use to share Digi?

cardsharing · 10-21-2009, 01:31 PM

Hi
You need a linux server, a phoenix serial readear, newcs+mpcs+cccam as emulator and ofcourse box key and rsa for your card

Quote:

Originally Posted by csubri

Hi!
I have Digi N3 card, and computer for server. What kind of cardreder should I buy, and which software to use to share Digi?

mirgeni · 10-22-2009, 09:09 AM

I have Tring card
how to config in smargo smatcard in my dobian server
can you help me my friend
thank you

cardsharing · 10-22-2009, 02:22 PM

Tring is working only in newcs+ cccam
read the smargo tutorial

http://cardsharing.us/forum/general-...artreader.html

Quote:

Originally Posted by mirgeni

I have Tring card
how to config in smargo smatcard in my dobian server
can you help me my friend
thank you

10-11-2009, 12:16 PM	#34
aritter Member Join Date: Aug 2009 Posts: 56	cs hello thanks cardsharing , i need help i will buy digi n3 and can i n3 cfg new card for dreambox cfg that dreambox read card please help

10-22-2009, 09:09 AM	#39
mirgeni Member Join Date: Jan 2009 Posts: 97	help I have Tring card how to config in smargo smatcard in my dobian server can you help me my friend thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://cardsharing.us/forum/digi-tv/114-how-setup-cccam-digitv-nagra3-cards.html
Posted By	For	Type	Date
Digitv+rsa+bk - One Stop Article	This thread	Refback	07-24-2010 10:35 AM
About Digitv Key Nagra3 \| DhanyWeb.com Resources	This thread	Refback	07-12-2010 12:49 AM
Csubri - Personen / Infos zu Name Csubri - Personen-Suchmaschine yasni.com	This thread	Refback	04-14-2010 08:22 PM
CARDSHARE.BIZ	This thread	Refback	11-02-2009 02:54 PM
satsjaak.nl	This thread	Refback	11-01-2009 12:09 AM

10-10-2009, 09:06 PM	#32
cristo4 Member Join Date: Aug 2009 Posts: 47	ok..i put my new n3 card in my dm800 with cccam+newcs+mpcs and it works....but i get very high ecm times...from 0,700 in the few first seconds to 2 or 3 seconds after some time. And that's why the channels deode from my peerse instead of my card. Any help in getting ecm time low please?

10-16-2009, 03:41 PM	#35
szili_boy Junior Member Join Date: Sep 2009 Posts: 15	Hello to all, i have some news, i've heard some rumors that it is possible to read N3 card without mpcs, with a newcs+cccam connection via radegast (R line with 256 at the end in cccam.cfg) I've tried to configure but it is something wrong with my config R line is always offline. And there is an alternative to newcs it is called rqcs. @cardsharing: setting frequency to 700Mhz is safe? Card will resist?

10-21-2009, 01:24 PM	#37
csubri Junior Member Join Date: Oct 2009 Posts: 1	Hi! I have Digi N3 card, and computer for server. What kind of cardreder should I buy, and which software to use to share Digi?

User Name		Remember Me?
Password