DM8000 help!

[rahimi29]

Hi

Could do with some input from you all.
I have a DM8000 which was working good,but for the past couple of days have encounter a problem.I get majority of free channels but unable to get the pay channels the same error message keeps appearing,

NO DATA ON TRANSPONDER! (TIMEOUT READING PAT)

Unsure if this is a software problem or a problem with the tuner,have tried most images and also different channel settings,but no joy.Have run out of ideas to rectify this HELP!!
Wondered if anybody else has had this problem?

DM8000
C/S
TM500
1.2 M DISH

[cardsharing]

Hi
try with hte latest likra settings and the latest dreambox edit

Originally Posted by rahimi29

Hi

Could do with some input from you all.
I have a DM8000 which was working good,but for the past couple of days have encounter a problem.I get majority of free channels but unable to get the pay channels the same error message keeps appearing,

NO DATA ON TRANSPONDER! (TIMEOUT READING PAT)

Unsure if this is a software problem or a problem with the tuner,have tried most images and also different channel settings,but no joy.Have run out of ideas to rectify this HELP!!
Wondered if anybody else has had this problem?

DM8000
C/S
TM500
1.2 M DISH

[THE_GUARDIAN]

try with cardsharing suggestion and maybe on second tuner and if nothing happened dish alignemnt or LNB could be your problem but your info are not enough... image? satellites? rotor? clone? meoboot? setting name?

[rahimi29]

hi
dish 1.2m channel master motorized (42E TO 30W)
tried most images
sattelite ,28.2E,1W,19.2E,30W
actuator connect to V-box
DM8000 original
tried different setting like my own search ,vhannibal E2 ,

on those sat i get all free channels but even when i search over scrambled channels without using emu get the message saying NO DATA ON TRANSPORTER (TIMEOUT READING PAT) and with signal strength about 70 to 80% there deffo in not the the dish alignemnt or even i changed the LNB with the same result ill get some of sky germany on 19.2e i tried the second tuner aswell no success and for C line is deffo working because i tried on my other receiver wich is TM500 with the same dish and lnb so this is very confusing what could be the problem tuner which picks some frequency and some not ,or could i put doggy image into it even reflashing does not cure it or damaged image setting there i am puzzled or i wish it was possible to put the receiver to original factory because reflashing it does not get rid of the problem hope somebody come with new idea and thanks for reading the post