Dreambox 7020 how to...

[Samson]

I just got a new DB 7020 and would like to view the Italian RAI channels when obscured.
I know that I should insert every month the keys... but how?
Should I first install a specific image?
Can someone supply a step by step tutorial?

Thank you in advance

[cardsharing]

Hello
1.install dm 7020 nabilosat image
2.install cccam using yelow button
-addons download manager
-nabilosat image cams
-select CCcam 2.1.1 Complet
install cccam
3.push blue button and then red buton(update keys)

You are done

[Samson]

Thank you for the kind and prompt reply.

Unfortunately I have another problem to solve first... I cannot setup the network connection. I have used Dcc E2, the system finds the PC IP and the router IP but not the DB. I've tried different IP solutions but none worked.

I have also tried via laptop but the same thing happened.

Am I doing something wrong?

When I first started the DB it gived an IP 10.0.0.97 and my pc IP is 85.156.230.XX, I have changed the DB IP to 85.156.230.X1 but it didn't work.

Any solutions?

[cardsharing]

it seems that you have a real ip and your pc is connected directly on the internet
Do you use a router?

Originally Posted by Samson

Thank you for the kind and prompt reply.

Unfortunately I have another problem to solve first... I cannot setup the network connection. I have used Dcc E2, the system finds the PC IP and the router IP but not the DB. I've tried different IP solutions but none worked.

I have also tried via laptop but the same thing happened.

Am I doing something wrong?

When I first started the DB it gived an IP 10.0.0.97 and my pc IP is 85.156.230.XX, I have changed the DB IP to 85.156.230.X1 but it didn't work.

Any solutions?

[Samson]

Originally Posted by cardsharing

it seems that you have a real ip and your pc is connected directly on the internet
Do you use a router?

Yes, it's a real ip and the pc is connected to a router (A-Link ADLS 2+)...

[cardsharing]

Hello
I think your router is setup as a bridge and you have the connection parameters in your pc
You must set the internet connection parameters in your router and then you will have the local pc ip as local ip ( 192.168.... or 10.0. etc)
Set dhcp enable in expert setup,comunications setup and then you can access your dreambox

Originally Posted by Samson

Yes, it's a real ip and the pc is connected to a router (A-Link ADLS 2+)...

[Samson]

Yes, you were right, now I can connect after rebooting my router and reassigned the IP 10.0.0.3.

At the moment I have installed the nabilosat image successfully.

But don't know how to install the CCcam e2... there are two files in the zip:

e2_CCcam_212_onlybin_nab.tgz
and
e2_CCcam_212_full_nab.tgz

in the bin folder there is a file "CCcam_212", in the camscript folder "Ncam_CCcam2.1.2.sh" and in the etc folder "CCcam.cfg" which should I use? and how/where do I put them in the DB? Should I unzip them first?

Will I need some other software?

This part I didn't understand:

2.install cccam using yelow button (do I need first to place the file in the DB?)
-addons download manager (is this another software to be downloaded?)
-nabilosat image cams (where do I get them?)
-select CCcam 2.1.1 Complet
install cccam

sorry to be such a pain, but I'm a real newbe... anyway I'm learning

Thanks again for the help.

[cardsharing]

Hi
Check your dreambox remote control, you have some buttons there, yelow, blue red and green

install cccam using yelow button (do I need first to place the file in the DB?)
-addons download manager (is this another software to be downloaded?)
-nabilosat image cams (where do I get them?)
-select CCcam 2.1.1 Complet
install cccam

Originally Posted by Samson

Yes, you were right, now I can connect after rebooting my router and reassigned the IP 10.0.0.3.

At the moment I have installed the nabilosat image successfully.

But don't know how to install the CCcam e2... there are two files in the zip:

e2_CCcam_212_onlybin_nab.tgz
and
e2_CCcam_212_full_nab.tgz

in the bin folder there is a file "CCcam_212", in the camscript folder "Ncam_CCcam2.1.2.sh" and in the etc folder "CCcam.cfg" which should I use? and how/where do I put them in the DB? Should I unzip them first?

Will I need some other software?

This part I didn't understand:

2.install cccam using yelow button (do I need first to place the file in the DB?)
-addons download manager (is this another software to be downloaded?)
-nabilosat image cams (where do I get them?)
-select CCcam 2.1.1 Complet
install cccam

sorry to be such a pain, but I'm a real newbe... anyway I'm learning

Thanks again for the help.

[Samson]

I would need more information on how to install the CCcam... do I use Dcc_e2 to transfer the zip file of e2_CCcam_212_full_nab.tgz if yes, how? If not, should I open the file on my PC and then transfer some specific CCcam files? If yes where and how? I have pushed the yellow button but the "addons download manager" says that there is nothing to install... please bare with me, I'm trying my best to learn but some procedures are out of my understanding (at the moment).

I'm able to open the Dcc_e2 and it connects fine to the DB, the router and the PC but I don't know what to do afterwards...

Please note that I don't have the DB connected to the TV when it's connected to the PC, therefore in order to use the remote I must move and connect the DB to the TV (the PC is in another room).

Please advise.

[cardsharing]

Oke, if you dont want to use your remotere here is the files:
Check the attachments:

Dont forget to set chmod 755 for the cccam from /var/bin/