Can connect to CCcam by LAN but can't outside my LAN

[smog]

Hi to everybody.

I bought 2 Dreamboxes 500 Enigma1 to test linux based receivers. Image sifteam 1.9.4. CCcam 2.2.1. I set up one as server and one as client.
All I'm doing is only for test!

I succeeded in sharing within my LAN.
I would like to share externally, but I can't.

I followed this steps:

1.I subscribed Dyndns service
2.In my router I opened and forwarded port 12000 to Dreambox address. Port scan revealed that the port is opened.
3.I set up Inadyn on the dreambox Server. I think it works because I got the message that IP has been successfully updated.

Nothing to do. CCCam cannot connect.

I think F Line and C Line are ok, because within my LAN everything works fine (I only replaced in the client the LAN address with the Dyndns address)

Anybody can help me? Thank you very much in advance. I'm getting crazy...

[lampard]

1.disable dhcp on the dreamboxs and set static ip ex 192.168.1.110 and 192.168.1.111 for the second dreambox
2.change the default listener port for the dreambox with card inserted
3. dont use inadyn in dreambox because he will send the local ip ( 192.168...) tot the dyndns service . you can check on the dyndns.org what ip is set for your dyndns
4. use dyndns menu from the router to update dyndns-ip
5. Check F and C line

Originally Posted by smog

Hi to everybody.

I bought 2 Dreamboxes 500 Enigma1 to test linux based receivers. Image sifteam 1.9.4. CCcam 2.2.1. I set up one as server and one as client.
All I'm doing is only for test!

I succeeded in sharing within my LAN.
I would like to share externally, but I can't.

I followed this steps:

1.I subscribed Dyndns service
2.In my router I opened and forwarded port 12000 to Dreambox address. Port scan revealed that the port is opened.
3.I set up Inadyn on the dreambox Server. I think it works because I got the message that IP has been successfully updated.

Nothing to do. CCCam cannot connect.

I think F Line and C Line are ok, because within my LAN everything works fine (I only replaced in the client the LAN address with the Dyndns address)

Anybody can help me? Thank you very much in advance. I'm getting crazy...

[smog]

Thank you for your reply.
When I go home tonight, I will try!

On the dreamboxes I set 192.168.1.8 and 192.168.1.9. DHCP OFF

For changing de default port, I have to add in the F:line "SERVER LISTEN PORT: XXX" Is it correct?

If I understood, I don't have to use inadyn on the server but I have to set up my dyndns account directly on the router... Is it correct? Ok, I think my router has this possibility.

Where should I insert the IP I find in dyndns website?

Sorry for the all these questions, but I'm a newbie ....