Using dreambox 800 as server ? How ?

novastreamer · 12-04-2009, 05:39 PM

Hello guys,

I recently bought an JSC card viacces card to experiment with cs.

My question ... Can somebody help me in layman's terms how to use my dreambox 800 as a server with my local card and how i have to create the cccam.cfg file so people can join my server and visa versa ? I have some knowledge on c and f lines but i just need someone who can help me to put it all together .

Any help would be so apreciated !!

thank you !!

THE_GUARDIAN · 12-05-2009, 11:09 PM

3 steps first of all, just to start but don't forget to specify image name in use next time, anyway:

create a dynamic host i.e xxx.no-ip.org

open in router port # i.e. 12000 by default in cccam if you don't specify a different one to allow your datas going outside

make sure you've filled dyndns options (name, pswd, account etc) in your dream image installed (search it in blue panel)

to prevent Seca problems 2 and 3 in same Ident set SECA HANDLER: 2 in cccam by adding these comands at the end of cccam.cfg

Code:

B: /dev/sci0 07
SECA HANDLER: 2 
SMARTCARD CLOCK FREQUENCY: /dev/sci0 5500000
SMARTCARD WRITE DELAY: /dev/sci0 100

now you can create share by using Cline Manager or manually editing with DCC2.96.
These 2 programs are posted here in forum.
Cccam 2.0.11 is my preferred but 2.1.3 works fine and it is the last one.

All you may need is here http://cardsharing.us/forum/general-...-tutorial.html

12-04-2009, 05:39 PM	#1
novastreamer Member Join Date: Dec 2009 Posts: 30	Using dreambox 800 as server ? How ? Hello guys, I recently bought an JSC card viacces card to experiment with cs. My question ... Can somebody help me in layman's terms how to use my dreambox 800 as a server with my local card and how i have to create the cccam.cfg file so people can join my server and visa versa ? I have some knowledge on c and f lines but i just need someone who can help me to put it all together . Any help would be so apreciated !! thank you !!

12-05-2009, 11:09 PM	#2
THE_GUARDIAN Super Moderator Join Date: Feb 2009 Location: Ticino CH Posts: 1,327	3 steps first of all, just to start but don't forget to specify image name in use next time, anyway: create a dynamic host i.e xxx.no-ip.org open in router port # i.e. 12000 by default in cccam if you don't specify a different one to allow your datas going outside make sure you've filled dyndns options (name, pswd, account etc) in your dream image installed (search it in blue panel) to prevent Seca problems 2 and 3 in same Ident set SECA HANDLER: 2 in cccam by adding these comands at the end of cccam.cfg Code: B: /dev/sci0 07 SECA HANDLER: 2 SMARTCARD CLOCK FREQUENCY: /dev/sci0 5500000 SMARTCARD WRITE DELAY: /dev/sci0 100 now you can create share by using Cline Manager or manually editing with DCC2.96. These 2 programs are posted here in forum. Cccam 2.0.11 is my preferred but 2.1.3 works fine and it is the last one. All you may need is here http://cardsharing.us/forum/general-...-tutorial.html Last edited by THE_GUARDIAN; 12-05-2009 at 11:13 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

User Name		Remember Me?
Password