oscam 1.00 + CCcam 2.1.4 on ubuntu help

[lightwave]

hi friens i want to reshare my friedns c line with oscam+cccam but something was wrong i couldnt figure out so far. Can you help.









oscam.server

# remote CCcam reader

[reader]
label = remote
protocol = cccam
device = server,port
account = user4,pass4
group = 1
caid = 0D00,0664
cccversion = 2.0.11

oscam.conf

# main configuration
#

[global]
nice = -1
WaitForCards = 1

# logging

logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
port = 988
aulow = 120
monlevel = 1

# web interface

[webif]
httpport = 81
httpuser = user
httppwd = pass

# anti-cascading

[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log
denysamples = 9

# protocols

[newcamd]
key = 0102030405060708091011121314
port = 10000@0D00:0000C4,0000C8,0000CC,0000C0
port = 10001@0664:000000

oscam.user

#
# user configuration
#

# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
# user for group 2 with monitor access, AU enabled

[account]
user = 1234
pwd = 1234
monlevel = 1
uniq = 1
group = 1
au = 0

cccam.cfg

## this config contains almost no settings this means that CCcam is running on his deafault settings !
## this means that the telnet port is 16000 and has no user & password!!
################################################## ################################################## ##
## the telnet is important for the check script!!
## so never change port 16000 and give it a user pass and never! set allow telnet to no !!!
## the best thing to do is to copy your lines into this config.
## this Nline uses the 256 trick to get your card that is being read in newcs as hop 0
## but this works only with CCcam 2.1.3 or lower version !
################################################## ################################################## ##


N: 127.0.0.1 10000 1234 1234 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 10001 1234 1234 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: 1234 1234

SERVER LISTEN PORT : 12000 ### use differend port as this port 12000 every one knows this port !! ###
ALLOW TELNETINFO: yes ### never change this setting !!! ###
WEBINFO USERNAME : user
WEBINFO PASSWORD : pass

[cardsharing]

Hi
You can use the 256 trick only with cccam 213 or lower

If you use cccam 214 or higher version then your card will be in hop 10

so, use ccam 213 and everything will be oke

[lightwave]

Originally Posted by cardsharing

Hi
You can use the 256 trick only with cccam 213 or lower

If you use cccam 214 or higher version then your card will be in hop 10

so, use ccam 213 and everything will be oke

thanks for your advice ok now

>>>>http://cardsharing.us/forum/turkey/6...-sayg-lar.html<<<<