Platforma HD, DREcrypt, ver 14.

mishka_gr · 01-01-2010, 09:44 PM

I have a card of Platforma HD, which is ver 14 and I want to use it with my dreamboxes (salon-bedroom-guestroom).
Until now tried every patched cardreader, any strange setup without luck (cccam_2.1.3, mpcs_16d, mpcs_16f, various oscam svn) so I'm using it with proprietary receiver at my salon.

This fact is causing daily harsh complaints from my mother-in-law which affects my emotional stability.

If anybody can help, providing firm and accurate infos or software, I'll appreciate it and I'll be grateful as long as my marriage will last!

Please, do not reply with answers such as "use scam 3.52 and the CI module with DM800 as I did" 'cause my nervous are not in good condition as should be!!!

Thank you, Thank you!

adskiqt · 01-02-2010, 03:13 AM

The decision is mpcs_16f+mgcamd_1.31 to update
and then you can use CCcam_2.1.3

Setup for MPCS http://cardsharing.us/forum/attachme...16f-mipsel.zip

###mpcs.server###

Code:

[reader]
Label = PlatformaHD
Protocol = internal
system = dre
Device   = /dev/sci0
Au = 1
Caid     = 4AE1
Ident    = 4AE1:000000
Fallback       = 0
Group          = 1
EMMCache = 0,1,2

###mpcs.conf###

Code:

[global]
Nice            = -1
ClientTimeout   = 5
ClientMaxIdle   = 9999999
LogFile         = /tmp/mpcs.log
MaxLogSize      = 500

[dreambox]
User = root
EMM = 1

[newcamd]
key           = 0102030405060708091011121314
port          = 15001@4AE1:000000

###mpcs.user###

Code:

[account]
User  = user
Pwd   = pass
Uniq  = 0
Group = 1
Ident = 4AE1:000000
Au    = PlatformaHD

Setup for MgCamd (/etc/keys/..)

###mg_cfg###

Code:

C: { 01 }
A: { 01 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 03 }
K: { 05 }
Q: { 60 }
P: { 00 }
O: { 01 }
S: { 03 }
L: { 00 } 127.0.0.1 514 /tmp/mgcamd.log
H: { 07 }
R: { 00 }
D: { 01 }

###newcamd.list###

Code:

CWS_CONNECT_TIMEOUT = 120

CWS = 127.0.0.1 15001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

adskiqt · 01-02-2010, 03:14 AM

delete...

kam · 01-02-2010, 08:36 AM

yes mpcs and mgcamd works

mishka_gr · 01-02-2010, 04:01 PM

@adskiqt
I'm going to test later on, as card is ..busy (mother-in-law) and post log files
Noticed very few differences from what I have
E.g EMMCache = 1,1,2
and in mgcamd very few about the timmings and prefeared protocol

Pleas pm with msn messanger or icq

adskiqt · 01-02-2010, 04:27 PM

Quote:

Originally Posted by mishka_gr

Pleas pm with msn messanger or icq

mbaros · 01-02-2010, 05:11 PM

Quote:

Originally Posted by adskiqt

How can I run HD Pethouse
Help you

adskiqt · 01-02-2010, 06:13 PM

Quote:

Originally Posted by mbaros

How can I run HD Pethouse
Help you

For now this card not supported by cardsharing. The card can be used only in original drecam, scam(on dm800/8000) or multicast(on azbox).

mishka_gr · 01-03-2010, 12:18 AM

So after the suggested config and setup we are on same point as on the beginning.

Anybody?

Amfibia · 01-12-2010, 04:01 PM

From what I know the Ver14 card isn't working in any Softcam so far.
However I did read on IHAD that there was someone that already had an Ver15 card, Don't know if that is really true that they exist already, and that this card works for the ECM's in CCcam 2.1.3.

So,
Ver13 works for sure in CCcam 2.1.3
Ver14 does not work in any softcam afaik
Ver15 is said by one person sofar that it should work and that it is available

Penthouse HD does not work yet either

If you have any other info or if you got the card working than please reply so I know I should purchase a card

01-01-2010, 09:44 PM	#1
mishka_gr Junior Member Join Date: Dec 2009 Posts: 16	Platforma HD, DREcrypt, ver 14. I have a card of Platforma HD, which is ver 14 and I want to use it with my dreamboxes (salon-bedroom-guestroom). Until now tried every patched cardreader, any strange setup without luck (cccam_2.1.3, mpcs_16d, mpcs_16f, various oscam svn) so I'm using it with proprietary receiver at my salon. This fact is causing daily harsh complaints from my mother-in-law which affects my emotional stability. If anybody can help, providing firm and accurate infos or software, I'll appreciate it and I'll be grateful as long as my marriage will last! Please, do not reply with answers such as "use scam 3.52 and the CI module with DM800 as I did" 'cause my nervous are not in good condition as should be!!! Thank you, Thank you!

01-02-2010, 03:14 AM	#3
adskiqt Senior Member Join Date: Sep 2009 Location: Plovdiv, Bulgaria Posts: 153	delete... __________________ http://www.pingtest.net/result/10227479.png Last edited by adskiqt; 01-02-2010 at 03:25 AM. Reason: double post

01-02-2010, 04:01 PM	#5
mishka_gr Junior Member Join Date: Dec 2009 Posts: 16	@adskiqt I'm going to test later on, as card is ..busy (mother-in-law) and post log files Noticed very few differences from what I have E.g EMMCache = 1,1,2 and in mgcamd very few about the timmings and prefeared protocol Pleas pm with msn messanger or icq Last edited by mishka_gr; 03-11-2011 at 11:15 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-02-2010, 08:36 AM	#4
kam Member Join Date: Dec 2009 Posts: 66	yes mpcs and mgcamd works

01-03-2010, 12:18 AM	#9
mishka_gr Junior Member Join Date: Dec 2009 Posts: 16	So after the suggested config and setup we are on same point as on the beginning. Anybody?

01-12-2010, 04:01 PM	#10
Amfibia Junior Member Join Date: Jan 2010 Posts: 4	From what I know the Ver14 card isn't working in any Softcam so far. However I did read on IHAD that there was someone that already had an Ver15 card, Don't know if that is really true that they exist already, and that this card works for the ECM's in CCcam 2.1.3. So, Ver13 works for sure in CCcam 2.1.3 Ver14 does not work in any softcam afaik Ver15 is said by one person sofar that it should work and that it is available Penthouse HD does not work yet either If you have any other info or if you got the card working than please reply so I know I should purchase a card

User Name		Remember Me?
Password