tivùsat

[gucar2]

have you information for setup the new card tivùsat ??

it is nagravision/pangea and in this moment work only with your decoder

i've tested it with cccam newcs gbo* and other but don't work

if you have an idea.....................................

for test i've dm800 and smargo

best regards

[cardsharing]

its nagra3 cards, you need boxkey and rsa

Originally Posted by gucar2

have you information for setup the new card tivùsat ??

it is nagravision/pangea and in this moment work only with your decoder

i've tested it with cccam newcs gbo* and other but don't work

if you have an idea.....................................

for test i've dm800 and smargo

best regards

[d0n4ld]

Originally Posted by cardsharing

its nagra3 cards, you need boxkey and rsa

Hi

you know the Solotion?

[cardsharing]

the boxkey and rsa can be extracted only from receiver
Take a lok on this thread:

http://cardsharing.us/forum/polsat/1...3-cards-4.html

and contact kowalelektronik user

[kowalelektronik]

Originally Posted by roy

what the rom of card tivosat ?

Here is log from newcs:

when i start newcs by telnet the log is :

root@dm7020:/usr/bin# ./newcs_1.67 -nd -c /var/tuxbox/config/newcs.xml
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:06
Reading Config file from /var/tuxbox/config/newcs.xml
NewCS is trying to bind to IP: 127.0.0.1
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: verbose
type: all
output: console,tcp
logger config: level 2 type 255 output 5
Console log options: level 2 type 255
TCP log options: level 1 type 255
[ 06:47:11 ] [ Box detect ] Box type 2 (Dream Multimedia (PPC) Box)
[ 06:47:11 ] [ Config ] Option <blockc0> for device 0 (Lower) not present, defaulting to NO
[ 06:47:11 ] [ Config ] Pincode for device 0 (Lower): 0000
[ 06:47:11 ] [ Config ] /dev/sci0 ECM priority: round
[ 06:47:11 ] [ Config ] Option <blockc0> for device 1 (Upper Cardreader) not present, defaulting to NO
[ 06:47:11 ] [ Config ] Value in <ipk> for device 1 (Upper Cardreader) is INVALID, skipping...
[ 06:47:11 ] [ Config ] Value in <ucpk> for device 1 (Upper Cardreader) is INVALID, skipping...
[ 06:47:11 ] [ Config ] Pincode for device 1 (Upper Cardreader): 0000
[ 06:47:11 ] [ Config ] /dev/sci1 ECM priority: round
[ 06:47:11 ] [ Newcamd ] Server name : newcs
[ 06:47:11 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 06:47:11 ] [ Newcamd ] User 2: test, Pass: test, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 06:47:11 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 06:47:11 ] [ EMM Cache ] Initialising dynamic Cache
[ 06:47:11 ] [ ECM Cache ] Initialising dynamic Cache
[ 06:47:11 ] Calibrating delay loops
[ 06:47:11 ] usleep(5) takes: 0 s 13 us
[ 06:47:11 ] usleep(10) takes: 0 s 16 us
[ 06:47:11 ] usleep(100) takes: 0 s 107 us
[ 06:47:11 ] usleep(500) takes: 0 s 507 us
[ 06:47:11 ] Allocation memory for 200 regular users
[ 06:47:11 ] [ Loader ] Starting Telnet on port 3001
[ 06:47:11 ] [ SockSrv ] Server thread started
[ 06:47:11 ] [ Loader ] Started HTTP-server on port: 8080
[ 06:47:11 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 06:47:11 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 06:47:11 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 06:47:11 ] [ Sci ] resetting card now
[ 06:47:11 ] [ Sci ] Reset
[ 06:47:11 ] [ Sci ] Card reset
[ 06:47:13 ] [ ATR ] T=1 1etu=32.00us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 06:47:13 ] [ ATR ] Historical bytes: T I G E R 0 0 3 R e v 2 5 0
[ 06:47:13 ] [ Loader ] Init Nagra card
[ 06:47:13 ] NAGRA: Rom rev: 3
[ 06:47:13 ] [ Nagra ] -> card
[ 06:47:13 ] [ Nagra ] <- card
[ 06:47:15 ] [ Nagra ] -> card
[ 06:47:15 ] [ Nagra ] <- card
[ 06:47:17 ] [ Nagra ] i/o error ?
[ 06:47:17 ] [ Loader ] Card 1800 on port /dev/sci0 failed
[ 06:47:17 ] [ Loader ] Starting Newcamd Server on port 10000
[ 06:47:17 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 06:47:17 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 06:47:17 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 06:47:17 ] [ Sci ] No card present in reader
[ 06:47:17 ] [ Loader ] Reset failed ...
[ 06:47:17 ] [ Newcamd ] Newcamd thread Server started on port 10000
newcamd: main loop
[ 06:47:17 ] [ Loader ] Starting Newcamd Server on port 10001
[ 06:47:17 ] [ Newcamd ] Newcamd thread Server started on port 10001
newcamd: main loop
[ 06:47:17 ] [ Loader ] Reinit card with caid 1800
[ 06:47:17 ] [ Sci ] Closing device /dev/sci0 [Handle=4]
[ 06:47:17 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 06:47:17 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 06:47:17 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 06:47:17 ] [ Sci ] resetting card now
[ 06:47:17 ] [ Sci ] Reset
[ 06:47:17 ] [ Sci ] Card reset
[ 06:47:18 ] [ ATR ] T=1 1etu=32.00us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 06:47:18 ] [ ATR ] Historical bytes: T I G E R 0 0 3 R e v 2 5 0
[ 06:47:18 ] [ Loader ] Init Nagra card
[ 06:47:19 ] NAGRA: Rom rev: 3
[ 06:47:19 ] [ Nagra ] -> card
[ 06:47:19 ] [ Nagra ] <- card
[ 06:47:21 ] [ Nagra ] -> card
[ 06:47:21 ] [ Nagra ] <- card
[ 06:47:23 ] [ Nagra ] i/o error ?
[ 06:47:23 ] [ Loader ] Card 1800 on port /dev/sci0 failed
[ 06:47:23 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 06:47:23 ] [ Sci ] Closing device /dev/sci1 [Handle=6]
[ 06:47:23 ] [ Sci ] Opening device /dev/sci1
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 06:47:23 ] [ Sci ] No card present in reader
[ 06:47:23 ] [ Loader ] Reset failed ...
[ 06:47:23 ] [ Loader ] Reinit card with caid 1800


My part of newcs.xml file:

<device>
<name>Lower</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<export>yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>1234567890BOXKEY</boxkey>
<rsa>1234567890RSAlongKEY</rsa>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>


So card is: [ ATR ] Historical bytes: T I G E R 0 0 3 R e v 2 5 0

any idea ?
whats wrong ?

And of course i have right boxkey and rsa extracted from receiver.

I was testing that card some time ago, decoding data fro TIVU Humax receiver was done without any problem, like from others providers.

But in case of this card, it mus use some new CMD's and newcs can't work with it.

So we have to wait for some update of newcs.

B.R.

[cardsharing]

it seems that newcs cannot read the card
We have to wait for some update of newcs

[gucar2]

thanks for your interesting, in this moment i use my card tivùsat with samsung cam+dm8000 and work fine.
i hope in the next cccam or newcs.
bye

[zombie]

Originally Posted by kowalelektronik

So card is: [ ATR ] Historical bytes: T I G E R 0 0 3 R e v 2 5 0

any idea ?
whats wrong ?

And of course i have right boxkey and rsa extracted from receiver.

I was testing that card some time ago, decoding data fro TIVU Humax receiver was done without any problem, like from others providers.

But in case of this card, it mus use some new CMD's and newcs can't work with it.

So we have to wait for some update of newcs.

B.R.

Hi kowalelektronik,
As you probably know, newcs team has stopped the project of his cardserver, if you are interested on tvsat, you can help the developers of Oscam.There is a new tread for tvsat on their forum and they need all help possible

[kowalelektronik]

Originally Posted by zombie

Hi kowalelektronik,
As you probably know, newcs team has stopped the project of his cardserver, if you are interested on tvsat, you can help the developers of Oscam.There is a new tread for tvsat on their forum and they need all help possible

Hi.

Give me some links on PM.

B.R.

[THE_GUARDIAN]

You can read at the moment with scam 3.56. Just read only and patched for Enigma2