Adult Viaccess card problems

owenski · 01-17-2010, 08:20 PM

I have Dreambox 7020 using Cccam 2.1.3 with a 7 port usb hub. I have 5 smartgo card readers in with cards. Now the problem I am having is that my new 4 channel viaccess Redhot card is giving alot of problems.

the Redhot card works in my smartgo for about 10 or so minutes then goes off

I have this Redhot card in usb port 6 and in cccam.cfg this is the way I have it below

SERIAL READER : /dev/usb/tts/6 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/6 6000002

is this the correct smartcard clock frequency for this viaccess Redhot card?

if not what should I set it too for my smartgo?

papinder · 01-17-2010, 09:03 PM

try 3680000 which should be ok

owenski · 01-17-2010, 09:29 PM

ok thanks I will try it

the smartgo settings are

3.20, 3.43, 3.69, 4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0 and 16.0 MHz

I will try the 3.69 as its the nearest

owenski · 01-18-2010, 01:04 PM

Ok I have set my cccam.cfg file as this below for the Redhot card but im still having problems with Redhot card going off in my smartgo usb reader.

SERIAL READER : /dev/usb/tts/6 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/6 3690002

its ok if you keep it on the one channel say Redhot sex tv 1 but when you change channel to 2, 3 or 4 the card switches off and the other redhot channels go blank

The Redhot card also does the same in any of the two dreambox card slots in my 7020 but the card works fine in my Diablo cam.

is it a faulty Redhot card or a cccam setting?

cardsharing · 01-19-2010, 08:51 PM

my advice is to use newcs or oscam to reading your card and then connect newcs to cccam

owenski · 01-20-2010, 12:31 PM

the strange thing is I have managed to fix it but in doing so discovered that there seems to be a problem with the Theme x sexview and my new Redhot card.

The thing I have discovered that if both cards are in a smartgo in my 7 channel usb hub they dont seem to like working with each other and when you change channel they stop working. However If I remove ether one then one will work ok on its own.

What I have done to make them both work is I had to remove both of them from my smartgos and I just have them now in the two front dreambox card slots and they are both working together.

I would still like to know why they refuse to work together in my smartgos as I plan to get more cards at some stage?

01-17-2010, 08:20 PM	#1
owenski Junior Member Join Date: Jul 2009 Posts: 16	Adult Viaccess card problems I have Dreambox 7020 using Cccam 2.1.3 with a 7 port usb hub. I have 5 smartgo card readers in with cards. Now the problem I am having is that my new 4 channel viaccess Redhot card is giving alot of problems. the Redhot card works in my smartgo for about 10 or so minutes then goes off I have this Redhot card in usb port 6 and in cccam.cfg this is the way I have it below SERIAL READER : /dev/usb/tts/6 smartreader+ SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/6 6000002 is this the correct smartcard clock frequency for this viaccess Redhot card? if not what should I set it too for my smartgo? Last edited by owenski; 01-18-2010 at 01:07 PM.

01-18-2010, 01:04 PM	#4
owenski Junior Member Join Date: Jul 2009 Posts: 16	Ok I have set my cccam.cfg file as this below for the Redhot card but im still having problems with Redhot card going off in my smartgo usb reader. SERIAL READER : /dev/usb/tts/6 smartreader+ SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/6 3690002 its ok if you keep it on the one channel say Redhot sex tv 1 but when you change channel to 2, 3 or 4 the card switches off and the other redhot channels go blank The Redhot card also does the same in any of the two dreambox card slots in my 7020 but the card works fine in my Diablo cam. is it a faulty Redhot card or a cccam setting? Last edited by owenski; 01-18-2010 at 01:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2010, 09:03 PM	#2
papinder Member Join Date: Dec 2009 Posts: 43	try 3680000 which should be ok

01-17-2010, 09:29 PM	#3
owenski Junior Member Join Date: Jul 2009 Posts: 16	ok thanks I will try it the smartgo settings are 3.20, 3.43, 3.69, 4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0 and 16.0 MHz I will try the 3.69 as its the nearest

01-19-2010, 08:51 PM	#5
cardsharing Administrator Join Date: Jan 2009 Posts: 1,680	my advice is to use newcs or oscam to reading your card and then connect newcs to cccam

01-20-2010, 12:31 PM	#6
owenski Junior Member Join Date: Jul 2009 Posts: 16	the strange thing is I have managed to fix it but in doing so discovered that there seems to be a problem with the Theme x sexview and my new Redhot card. The thing I have discovered that if both cards are in a smartgo in my 7 channel usb hub they dont seem to like working with each other and when you change channel they stop working. However If I remove ether one then one will work ok on its own. What I have done to make them both work is I had to remove both of them from my smartgos and I just have them now in the two front dreambox card slots and they are both working together. I would still like to know why they refuse to work together in my smartgos as I plan to get more cards at some stage?

User Name		Remember Me?
Password