help needed with newcs + multics

[sharp999]

Hello everyone,

I've been trying to get newcs + multics on clearOS 5.2 working for weeks - and very i'm frustrated now - any help would be much appreciated.

here is my setup:

newcs_1.67_rc1 + multics_b7_r27 + clearOS 5.2 enterprise + smargo smartreader+ with white sly card

problem: when i run newcs and multics - channels take too long to decode

I had the card running in newcs + cccam on my dm500 perfectly fine -
i think the problem may be because mhz is set at 357 - but this is the only freq the card can be read by the cardreader, in my dm500 it was 600mhz which was working perfectly fine - but on pc it doesn't work.

i have tried all the possible freq mhz settings but it only works in 357 mhz - both in phoenix and smartreader+ mode.

here is settings from my newcs.xml

<newCSconfig>
<readers name="smartreader">
<device>
<name>/dev/ttyUSB0</name>
<type>smartreader+</type>
<mhz>357</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>********</boxkey>
<irde*o-camkey>0000000000000000</irde*o-camkey>

<irde*o-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irde*o-camkey-data>
<crypto-special>No</crypto-special>

<ipk>0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>

<ucpk>000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

THANKS