irde*o2 digit*rk problem

[annehof]

2010/09/14 20:42:10 10018 s >> OSCam << cardserver started version 0.99.4svn, build #3058 (i686-pc-linux)
2010/09/14 20:42:10 10018 s version=0.99.4svn, build #3058, system=i686-pc-linux, nice=-1
2010/09/14 20:42:10 10018 s max. clients=509, client max. idle=120 sec
2010/09/14 20:42:10 10018 s max. logsize=10240 Kb
2010/09/14 20:42:10 10018 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/09/14 20:42:10 10018 s shared memory initialized (size=4338550, id=753664)
2010/09/14 20:42:10 10018 s auth size=4772
2010/09/14 20:42:10 10018 s services reloaded: 0 services freed, 1 services loaded
Warning: keyword 'customspeed' in reader section not recognized
Warning: keyword 't_mode t' in reader section not recognized
2010/09/14 20:42:10 10018 s userdb reloaded: 0 accounts freed, 5 accounts loaded, 0 expired, 0 disabled
2010/09/14 20:42:10 10018 s signal handling initialized (type=sysv)
2010/09/14 20:42:10 10018 s 789 service-id's loaded
2010/09/14 20:42:10 10018 s can't open file "/var/etc//oscam.tiers" (err=2), no tier-id's loaded
2010/09/14 20:42:10 10018 s can't open file "/var/etc//oscam.provid" (err=2), no provids's loaded
2010/09/14 20:42:10 10018 s monitor: initialized (fd=5, port=19741)
2010/09/14 20:42:10 10018 s camd 3.3x: disabled
2010/09/14 20:42:10 10018 s camd 3.5x: disabled
2010/09/14 20:42:10 10018 s cs378x: disabled
2010/09/14 20:42:10 10018 s newcamd: disabled
2010/09/14 20:42:10 10018 s cccam: disabled
2010/09/14 20:42:10 10018 s radegast: disabled
2010/09/14 20:42:10 10018 s logger started (pid=10019)
2010/09/14 20:42:10 10018 s http started (pid=10020)
2010/09/14 20:42:10 10020 h HTTP Server listening on port 1830
2010/09/14 20:42:10 10018 s reader started (pid=10021, device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2010/09/14 20:42:10 10018 s waiting for local card init
2010/09/14 20:42:13 10021 r02 card detected
2010/09/14 20:42:17 10021 r02 ATR: 3B 9F 21 0E 53 20 56 35 2E 37 9A
2010/09/14 20:42:18 10021 r02 Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2010/09/14 20:42:19 10021 r02 detect irde*o card
2010/09/14 20:42:20 10021 r02 card system not supported
2010/09/14 20:42:20 10021 r02 Normal mode failed, reverting to Deprecated Mode
2010/09/14 20:42:25 10021 r02 ATR: 3B 9F 21 0E 49 20 56 35 2E 37 9A
2010/09/14 20:42:26 10021 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2010/09/14 20:42:27 10021 r02 detect irde*o card
2010/09/14 20:42:28 10021 r02 card system not supported
2010/09/14 20:42:28 10021 r02 card initializing error
2010/09/14 20:42:29 10018 s init for all local cards done
2010/09/14 20:42:29 10018 s anti cascading disabled
2010/09/14 20:42:29 10018 s dvbapi: dvbapi disabled

whats up ?

[oZi]

same problem mate,hope someone wil figure the problem ..succes.

[epimeno]

its not a good idea to post ATR in public, better delete it.

[RebellionLeader]

All problems I had getting my irde*o2 canaldigitaal card to work were resolved by using a smargo cardreader. The internal cardreaders of my dreambox simply wouldnt read the card. Perhaps you have a similar issue.

[annehof]

i am using smargo ^^