NDS Dolce Card

[amboo]

How can i found out what is the card clock speed.
I want to overclock it to lower the ecm time.

[cardsharing]

<mhz>700</mhz>
set this option in newcs.xml

[amboo]

the card is read directly by cccam .. not newcs

[cardsharing]

# example
#
# SMARTCARD CLOCK FREQUENCY : <device> <freq>
if you want to use 700mhz then :

SMARTCARD CLOCK FREQUENCY: /dev/sci0 7000000

or

SMARTCARD CLOCK FREQUENCY: /dev/sci1 7000000

another examples:

SMARTCARD CLOCK FREQUENCY: /dev/sci0 8200000 (irde*o 0.195 to 0.1370)
SMARTCARD CLOCK FREQUENCY: /dev/sci1 5250000 ( nds ECM 0.210 DOWN TO 0.191

SMARTCARD CLOCK FREQUENCY: /dev/sci0 5300000 ( Sky uk 0.191 DOWN TO 0.172
SMARTCARD CLOCK FREQUENCY: /dev/sci1 5600000 (Digialb conax 0.275 down to 0.178

SMARTCARD CLOCK FREQUENCY: /dev/sci1 8300000 ( BULSAT IREDETO 2 PURPLE 0.215 DOWN TO 0.151

SMARTCARD CLOCK FREQUENCY: /dev/sci1 8420000 ( SHOWTIME IREDETO 2 0.225 DOWN TO 0.141

For dolce is oke 700mhz


what dreambox do you have?

[amboo]

My DB is DM800

I am a little affraid to use overclock... how sure are you that i could use the value of 700 ? not 7 mhz ?

[cardsharing]

if your dm is 800 use this one:
SMARTCARD CLOCK FREQUENCY: /dev/sci0 7000000

7000000 =7 mhz
dont worry m8, i use dolce nds card at 7mhz since 2 years and all working fine

Originally Posted by amboo

My DB is DM800

I am a little affraid to use overclock... how sure are you that i could use the value of 700 ? not 7 mhz ?

[amboo]

What is the card's original clock (MHz) ?

[amboo]

What is the card's original clock (MHz) ?? or is there a tool that can tell or show the clock speed ??

[cardsharing]

600-700 mhz

Originally Posted by amboo

what is the card's original clock (mhz) ?? Or is there a tool that can tell or show the clock speed ??

[amboo]

I've tested 7000000 but seems to be working better w/o overclocking...
Should i ho higher ?
After i save the cccam.cfg file do i need to reboot ?
My curent ecm time is between 0.103 and 0.138 w/o overclock