Go Back   Dreambox, Receivers, Television Forum, High definition TV, 3DTV,CCcam, Gbox, Servers, Exchange, TV, LCD, Mobile > Cardsharing Tutorials > How to setup a card > Problems with your card? Ask here for help ...
Reload this Page Polsat problem




Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 08-21-2009, 04:29 PM   #1
Junior Member
 
Join Date: Aug 2009
Posts: 23
Default Polsat problem
Hi and hello, hope you can help

I have been trying to get my Polsat card to work with CCcam for 3 days now with out luck.

I have valid rsa and bk.

Card reads perfect with newcs_1.67 and I can watch channels with mgcamd OK.

I want to use CCcam

I have look on the forum and downloaded a folder with everything in but it did not work. I understand you have to use mpcs.

The card is 1801:007101

Like I say it works perfect with newcs/mgcamd.

If anyone can help that would be great.

Thanks

Keano


keano is offline   Reply With Quote
Old 08-23-2009, 12:23 PM   #2
Administrator
 
cardsharing's Avatar
 
Join Date: Jan 2009
Posts: 1,680
Default
your card cannot be 1801: 007101 maybe 1803:000000
1801 -old nagra2 card
i have tested n3 card with newcs+mpcs+cccam
Check the files form how to setup a card and if you have problem come back ;0
cardsharing is offline   Reply With Quote
Old 08-23-2009, 03:52 PM   #3
Junior Member
 
Join Date: Aug 2009
Posts: 23
Default
Yes my card is 1801. I know its strange but it is card that comes with cam.
I asked guy from poland and he said this is because it needs to work with older receivers.

The card works great with mgcamd and newcs.

I downloaded your files and tried but it never worked.

I will keep on trying.

I know what needs to be done it just wont work for some reason.
keano is offline   Reply With Quote
Old 08-23-2009, 04:09 PM   #4
Administrator
 
cardsharing's Avatar
 
Join Date: Jan 2009
Posts: 1,680
Default
hello
try again with this file
replace in CCcam.cfg in L line 1803 with 1801 if your card is 1801
cardsharing is offline   Reply With Quote
Old 08-23-2009, 05:21 PM   #5
Junior Member
 
Join Date: Aug 2009
Posts: 23
Default
OK thanks.

Here is log from telnet using mgcamd, just to show you that 1801 is still working.

===== Nagra ECM on CaID 0x1801, pid 0x013b ======
prov: 000000
cw0:0 C4 17 AC 87 90 F9 8E 17
cw1:0 F7 DE B1 86 DC 9C 24 9C
[ 17:17:58 ] [ Newcamd ] ECM -> dummy (OK) [CAID 1801] [Prov 00000000] [SID 3330]
EMM: RSA Nagra2 key not found for id 7001 (pid 0x0083)
[newcamd] EMM-G (0x0083) -> 192.168.0.145:10000
[newcamd] EMM answer from 192.168.0.145:10000, 3:82
[mg0] -> ECM to newcamd 192.168.0.145:10000
===== Nagra ECM on CaID 0x1801, pid 0x013b ======
prov: 000000
cw0:0 C4 17 AC 87 90 F9 8E 17
cw1:0 F7 DE B1 86 DC 9C 24 9C
[ 17:17:58 ] [ Newcamd ] ECM -> dummy (OK) [CAID 1801] [Prov 00000000] [SID 3330]
EMM: RSA Nagra2 key not found for id 7001 (pid 0x0083)
[newcamd] EMM-G (0x0083) -> 192.168.0.145:10000
[newcamd] EMM answer from 192.168.0.145:10000, 3:82
[mg0] -> ECM to newcamd 192.168.0.145:10000
===== Nagra ECM on CaID 0x1801, pid 0x013b ======
prov: 000000
cw0:0 C4 17 AC 87 90 F9 8E 17
cw1:0 F7 DE B1 86 DC 9C 24 9C
[ 17:17:58 ] [ Newcamd ] ECM -> dummy (OK) [CAID 1801] [Prov 00000000] [SID 3330]
EMM: RSA Nagra2 key not found for id 7001 (pid 0x0083)
[newcamd] EMM-G (0x0083) -> 192.168.0.145:10000
[newcamd] EMM answer from 192.168.0.145:10000, 3:82
[mg0] -> ECM to newcamd 192.168.0.145:10000
keano is offline   Reply With Quote
Old 08-23-2009, 05:44 PM   #6
Junior Member
 
Join Date: Aug 2009
Posts: 23
Default
Still no pictue.

I can't work out why.

CCcam info shows this
+----------------------+------------+-----+--------+----------------+-------+-------------------------------+
| Host | Connected | Type| Version| NodeID | Cards | CAID/Idents |
+----------------------+------------+-----+--------+----------------+-------+-------------------------------+
|127.0.0.1:15000 |00d 00:01:15|camd3| | | 1 | |

So that is OK.

This is log from mpcs via telnt.

root@dreambox:/var/bin> ./mpcs
1970/01/01 1:04:45 199 s >> STREAMBOARD << mp-cardserver started
1970/01/01 1:04:45 199 s auth size=4636
1970/01/01 1:04:45 199 s services reloaded: 0 services freed, 3 services loaded
1970/01/01 1:04:45 199 s userdb reloaded: 0 accounts freed, 1 accounts loaded
1970/01/01 1:04:45 199 s signal handling initialized (type=sysv)
1970/01/01 1:04:45 199 s 2277 service-id's loaded
1970/01/01 1:04:45 199 s 22 lengths for caid guessing loaded
1970/01/01 1:04:45 199 s monitor: disabled
1970/01/01 1:04:45 199 s camd 3.3x: disabled
1970/01/01 1:04:45 199 s camd 3.5x: initialized (fd=6, port=15000)
1970/01/01 1:04:45 199 s cs378x: disabled
1970/01/01 1:04:45 199 s newcamd: disabled
1970/01/01 1:04:45 199 s radegast: disabled
1970/01/01 1:04:45 199 s resolver thread started
1970/01/01 1:04:45 199 s logger started (pid=201)
1970/01/01 1:04:45 199 s resolver started (pid=202, delay=30 sec)
1970/01/01 1:04:46 199 s proxy started (pid=203, server=127.0.0.1)
1970/01/01 1:04:46 199 s anti cascading disabled
1970/01/01 1:04:46 203 p02 proxy 127.0.0.1:22901 newcamd525 (fd=4)

I think the problem is mpcs is not connecting to newcs for some reason.

I am starting cardserver/emus via telenet, in this order:

./newcs
./mpcs
Open another window with putty then ./CCcam


mpcs is now telling me this

2009/08/23 17:42:40 199 s cardserver down
2009/08/23 17:42:40 199 s exit with signal 2
keano is offline   Reply With Quote
Old 08-23-2009, 06:00 PM   #7
Administrator
 
cardsharing's Avatar
 
Join Date: Jan 2009
Posts: 1,680
Default
try to connect cccam directly in newcs using N Line and make a log for newcs and cccam
You can log cccam using /var/bin/cccam -d&
cardsharing is offline   Reply With Quote
Old 08-23-2009, 06:24 PM   #8
Junior Member
 
Join Date: Aug 2009
Posts: 23
Default
OK here goes

18:22:55.006 CCcam: starting CCcam 2.0.9 compiled on May 17 2008@15:55:36
18:22:55.006 CCcam: ================================================== ========== ==========
18:22:55.008 CCcam: online using nodeId 2a509a25adedab94
18:22:55.041 CCcam: dvb api1 detected
18:22:55.044 CCcam: DM56xx/500/600 detected
18:22:55.044 CCcam: create 2 cam device(s)
18:22:55.050 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
18:22:55.050 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
18:22:55.051 CCcam: static cw not found or bad
18:22:55.052 CCcam: parsed 0 entries from /var/etc/CCcam.prio
18:22:55.053 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or no t found
18:22:55.054 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or n ot found
18:22:55.055 CCcam: server started on port 12000
18:22:55.068 CCcam: newcamd server 127.0.0.1:22901 user: cs2gbox
[ 18:22:55 ] [ Newcamd:22901 ] User cs2gbox logged in, client: CCcam
18:22:55.078 CCcam: newcamd caid 1801 providers 2 userid: 0
18:22:55.078 CCcam: newcamd card serial: 2be73ef1
18:22:55.079 CCcam: newcamd prov 00 000000 2be73ef1
18:22:55.080 CCcam: newcamd prov 01 000100 2be73ef1
root@dreambox:/var/bin> 18:23:18.928 CCcam: found nagra caid: 0x1803 ecmpid: 0x18b id: 0x0
18:23:18.929 CCcam: cam[0] set PMT for sid=3335
18:23:18.941 CCcam: start EMM
18:23:19.047 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:23:19.048 CCcam: cam[0] ecm odd nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:23:19.064 CCcam: EMM demux 1 set
18:23:19.066 CCcam: EMM: start filter on nagra emmpid: 0x83 caid: 0x1803 id: 0x0
18:23:19.130 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:23:19.131 CCcam: cam[0] ecm odd nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:23:19.231 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:23:19.231 CCcam: cam[0] ecm odd nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:23:20.359 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
18:23:24.264 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:23:24.264 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:23:24.365 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:23:24.366 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:23:24.465 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:23:24.465 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:23:27.692 CCcam: found nagra caid: 0x1803 ecmpid: 0x13b id: 0x0
18:23:27.693 CCcam: found nagra caid: 0x1801 ecmpid: 0x13a id: 0x0
18:23:27.693 CCcam: cam[0] set PMT for sid=3330
18:23:27.694 CCcam: start EMM
18:23:27.835 CCcam: EMM demux 1 set
18:23:27.836 CCcam: EMM: start filter on nagra emmpid: 0x83 caid: 0x1803 id: 0x0
18:23:28.357 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
18:23:29.972 CCcam: found nagra caid: 0x1803 ecmpid: 0x14b id: 0x0
18:23:29.973 CCcam: found nagra caid: 0x1801 ecmpid: 0x14a id: 0x0
18:23:29.973 CCcam: cam[0] set PMT for sid=3331
18:23:29.975 CCcam: start EMM
18:23:30.089 CCcam: EMM demux 1 set
18:23:30.090 CCcam: EMM: start filter on nagra emmpid: 0x83 caid: 0x1803 id: 0x0
18:23:36.337 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
18:23:40.365 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
keano is offline   Reply With Quote
Old 08-23-2009, 06:30 PM   #9
Administrator
 
cardsharing's Avatar
 
Join Date: Jan 2009
Posts: 1,680
Default
install newcs+cccam using blue panel or blue buttn from the remote control
and then put your bk and rsa in newcs.xml
What image do you use?
cardsharing is offline   Reply With Quote
Old 08-23-2009, 06:37 PM   #10
Junior Member
 
Join Date: Aug 2009
Posts: 23
Default
Sorry the above log is wrong. I never put rsa and bk in.

This is correct log now.

I use gemini 4.60

root@dreambox:/var/bin> 18:35:24.211 CCcam: ================================================== ====================
18:35:24.213 CCcam: starting CCcam 2.0.9 compiled on May 17 2008@15:55:36
18:35:24.214 CCcam: ================================================== ====================
18:35:24.215 CCcam: online using nodeId 2a509a25adedab94
18:35:24.256 CCcam: dvb api1 detected
18:35:24.259 CCcam: DM56xx/500/600 detected
18:35:24.259 CCcam: create 2 cam device(s)
18:35:24.265 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
18:35:24.266 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
18:35:24.267 CCcam: static cw not found or bad
18:35:24.268 CCcam: parsed 0 entries from /var/etc/CCcam.prio
18:35:24.269 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
18:35:24.269 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
18:35:24.270 CCcam: server started on port 12000
18:35:24.284 CCcam: newcamd server 127.0.0.1:22901 user: cs2gbox
[ 18:35:24 ] [ Newcamd:22901 ] User cs2gbox logged in, client: CCcam
18:35:24.296 CCcam: newcamd caid 1801 providers 2 userid: 0
18:35:24.297 CCcam: newcamd card serial: 2be73ef1
18:35:24.298 CCcam: newcamd prov 00 000000 2be73ef1
18:35:24.298 CCcam: newcamd prov 01 000100 2be73ef1
18:35:24.303 CCcam: found nagra caid: 0x1803 ecmpid: 0x18b id: 0x0
18:35:24.304 CCcam: cam[0] set PMT for sid=3335
18:35:24.307 CCcam: start EMM
18:35:24.333 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:24.334 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:24.432 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:24.433 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:24.444 CCcam: EMM demux 1 set
18:35:24.445 CCcam: EMM: start filter on nagra emmpid: 0x83 caid: 0x1803 id: 0x0
18:35:24.534 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:24.535 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:29.613 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:29.613 CCcam: cam[0] ecm odd nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:29.711 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:29.712 CCcam: cam[0] ecm odd nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:29.834 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:29.834 CCcam: cam[0] ecm odd nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:31.365 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
18:35:38.823 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:38.824 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:38.923 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:38.924 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:39.023 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
18:35:39.023 CCcam: cam[0] ecm even nok caid:0x1803 id:0x0 pid:0x18b Unknown
18:35:39.386 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
18:35:40.256 CCcam: found nagra caid: 0x1803 ecmpid: 0x13b id: 0x0
18:35:40.256 CCcam: found nagra caid: 0x1801 ecmpid: 0x13a id: 0x0
18:35:40.257 CCcam: cam[0] set PMT for sid=3330
18:35:40.257 CCcam: start EMM
18:35:40.291 CCcam: EMM demux 1 set
18:35:40.292 CCcam: EMM: start filter on nagra emmpid: 0x83 caid: 0x1803 id: 0x0
18:35:43.346 CCcam: nagra2 emu can't decode emm (id: 7001) no RSA key
keano is offline   Reply With Quote
Reply
Page 1 of 2 1 2




Tags
polsat, problem

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are Off
Refbacks are On


All times are GMT +1. The time now is 07:29 AM.

vBSkinworks Design

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.