sky italy problem: errore 9994

[Giga-sat]

sky it problem dont work in oscam/cccam in original box errore 9994..please help me

[pupa]

I have same problem, please help

[cardsharing]

first try to put your card in original receiver and wait 24 hours

if dont work your card has ben deactivated by sky because you didnt block emm and nano
the best option in this case is to burn your card, pls put 12v on the card
dont call sky and report this error, they will know that you use the card on cardsharing

Originally Posted by pupa

I have same problem, please help

[micev]

I see that more people then 1 have that problem...I have the same problem from last night....
Is there any security reason from sky or something else???
CARD 093b...

[THE_GUARDIAN]

Originally Posted by cardsharing

first try to put your card in original receiver and wait 24 hours

if dont work your card has ben deactivated by sky because you didnt block emm and nano
the best option in this case is to burn your card, pls put 12v on the card
dont call sky and report this error, they will know that you use the card on cardsharing

EXACTLY!

@all:
to get rights use original Skybox only and stay tuned on SkyUno channel (others are working too) some days before expiring date
Use electrical lighter several times to kill chip.
Don't say to call center any kind of error messages on tv screen, just tell them about blank screen. Full stop! Blank screen is their problem not yours

you forgot to tell us what kind of card is in use... for sure 093b
Intentions are to fire all 0919 and 093b cards replacing with new serial 0003 (09CD) already active and after that I think there will be the final attack to cs

[dbm123321]

Originally Posted by cardsharing

first try to put your card in original receiver and wait 24 hours

if dont work your card has ben deactivated by sky because you didnt block emm and nano
the best option in this case is to burn your card, pls put 12v on the card
dont call sky and report this error, they will know that you use the card on cardsharing

hi thanx for help

is this one ok
how to block emm and nano

blocknano = all
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

[cardsharing]

yes, its oke
also, you can disable emm send in cccam for your peers

ex:

F: user password 2 0 0

Originally Posted by dbm123321

hi thanx for help

is this one ok
how to block emm and nano

blocknano = all
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

[aspekt]

Here is my config
[reader]
Label = SkyIt
Protocol = internal
Detect = CD
Device = /dev/sci0
EMMCache = 0,1,0
BoxID =
Group = 1
mhz = 450
cardmhz = 450
lb_weight = 100
CAID = 093b
Ident = 093b:000000
fix9993 = 1
blocknano = all
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

Despite this, my card also gives an error 9994

[THE_GUARDIAN]

gentlemen: there is no way!
If they want they can do everything each time you get new rights and updates. They have power to block all and let's hope they cannot start card/decoder marriage!
Filtering doesn't solve the question actually.
This is my though.

[dreamfly12]

check pm